Risk of Brittle Fracture of Carbon Steel Piping During Hydrostatic Testing Technical Resource

Changes in steelmaking practices by certain mills over the last 5 years have resulted in seamless carbon steel pipe, fittings and flanges failing during hydrostatic testing. This article recommends steps that you can take to avoid such failures.

Formats for Download

DOWNLOAD

Related Resources

Description:

What is Microbiologically Influenced Corrosion (MIC) and why do contractors need to know anything about it? Well, it turns out that MIC can negatively affect your profits.

NCPWB Technical Bulletin: Microbiologically Influenced Corrosion (MIC)

Description:

On occasion we get questions from our members who would like to use backing flux in lieu of purging when making welds on stainless steel or other corrosion resistant materials. This bulletin describes an experiment conducted by NCPWB Consultant Walter Sperko where he had a colleague make stainless steel butt welds without any protection of the root of the weld, with inert gas backing, with backing flux and with flux-coated wire.

NCPWB Technical Bulletin: Purge to Protect Stainless-Steel Pipe Welds

Description:

When reviewing a Welding Procedure Specification (WPS) or a welder qualification record, the term "backing" frequently appears. In some cases, backing is required, while in others, it is optional. Backing can take various forms, including metal, non-fusing metal, nonmetallic materials, or even weld metal. But what exactly is "backing," and why is it important in welding?

NCPWB Technical Bulletin: A Welder Qualification Record Says “Backing: With or Without.” What Does That Mean?

Description:

The E6010 electrode is a wire encased in cellulose held together with salts and minerals. These electrodes penetrate better than low-hydrogen electrodes like E7018 when making root passes, making it easier to make a good root pass. However, E6010 introduces hydrogen into the weld creating a risk of cracking, and this article shows when its use should be limited.

NCPWB Technical Bulletin: When To Use E6010 Welding Electrodes

Description:

Piping codes are standard industry practice, and failure to agree on the one that applies to your work can result in ugly disputes with customers. Customer specifications can have inspection requirements that can result in repairs to welds that you did not plan for. Welders can make welds that put your business at risk. This article highlights what you can do to avoid these risks.

NCPWB Technical Bulletin: What Mechanical Contractor Managers Need to Know About Piping Codes and Customer Specifications

Description:

While there is a lot of buzz about modern waveform controlled power sources and how they make it easier for a welder to make the root pass, the basics of MIG welding have not changed. This article describes the technical aspects of GMAW, explains how the metal gets from the wire to the workpiece (transfer modes), and highlights what contractors need to pay attention to when bringing the process into their shop or field fabrication site.